How we should use accurately the AMMO colours? How can we should dilute the colours? Which air strain we should always use? why after I apint it seems to be like a non common floor or craters? Will we should apply a primer earlier than? All of this and way more on this new Mig Jimenez’s video.
AMMO Acrylic colours right here: http://bit.ly/2sFPGDH
AMMO Acrylic Thinner right here: http://bit.ly/2rn6ueJ
AMMO Transparator right here: http://bit.ly/2shtvRA
AMMO ONE SHOT PRIMER right here: http://bit.ly/2m3VMLe
Different video explaining how you can use AMMO paints: https://youtu.be/yZHAqxSHHvc?record=PLVWDfKLIYU1fo06X4jCzhpzfvfEt_TH7v
AMMO FACEBOOK: https://www.fb.com/MigJimenez/
source
Super tutoriel thanks fot that Mr. (Mig) Jimenez. You're the One man. It is very nices vidéos. Professional and clearly explain thanks thanks and thanks. Big up to you. Pierrelebelgeapau.
Tamiya paints are the best, Vallejo paints clog my airbrush, I just purchased migs big box solution for late war German armor and it didn't even have thinner for the acrylic paints. I think I'll stay with Tamiya paints
I like this paint, great vid and product!
That's it hombre… it works…
This stuff doesn't even stick to primer. it just runs away and looks awful why?
Anh Mig J ơi, sơn nhà anh là khó sơn nhất trong các dòng acrylics đó ạ.
Those are the worst paints I ever tried, and is a shame,
Miguel Jimenez is one of the best (if not the best) modelers in the world but
these acrylics are terrible, his app is also terrible, I do not understand why
he is approving this, they focused too much on the toxicity, but we
modelers are aware of that and have our own masks, we need a product that
works, not something that is simply non toxic or not smelly but not working at all, is
strange, because on the other hand, the weathering products of his brand are
fantastic, please do something like the AK real colors, because those are the ones I will use from now and ever
Ammo mig is trash. I have thinned this bullshit beyond 50/50 and all it does is dry on the tip of my airbrush. I've spent the last week trying to do this and I'll I've done is waste my time. Ammo mig paint is by far the WORST product I've ever painted with. Worst than Testors hahaha. I can never get a straight answer as to why this is happening. All I see is people spraying with it on youtube and it's perfect for them. For me? Nope. I can apply light coats just fine, how do I stop this trash from clogging my airbrush 10 seconds after beginning?
Thr problem with this technique is you get thick layer of uneven paint.
I have used Vallejo with flow improver and slo dri additives and painted the surface wet, and it came out very smooth, but it is too much hassle for me to blend it correctly and not very forgiving when spraying – always jsut on the edge of running.
I think the misting layer was good, but maybe you could have gone a little more wet on second layer? To get smoother finish…
…and that's why we have the good old leaded enamels for a better finish!
Firstly nice tutorial. Secondly I still get a clogged airbrush while using ammo paints. I hope you guys can cover that topic in the future episode.
Tamiya acrylics for me.
Should we HAVE to find out, HOW TO USE THEM ? ? ? Easier to buy a different make ! LOL Vallejo's excellent for hand painting.
The paint is really unpredictable when hand painting. Some color likes to clump up even when you do several thin layers like interior green.
In so far as I can see, whether you apply Ammo paints the right or the 'wrong' way, I would get a better result than by brushing alone. And at my current level of modelling, that would suffice
Hey Mig
Thanks for your product and videos
I have prepare everything following all my purchasing to aerographdiscount and I will test them tomorrow
Thanks again
Hey Mig, love yourproducts. I noticed some tip dry lately. Can I add some Retarder to the paint? Or mix Transparator and Thinner?
C'mon, you need very special ways to apply it right and even then the quality is much worse than other brands. Most of your other products is great and I'll keep using them, but I'm very disappointed with these paints (bought 20 colours just by trusting in your brand). Never again, my friend 🙁
okay so i finally get my hands on ammo paint and when it ried one shot primer its watery.
Like when i spray it its kinda water only i tried to shake it but still the same. Anyone encounter this before?
Do you have any tips for using a brush as i dont have access to a spray gun at the moment
What is 1.5 kegs of pressure in bar or PSI please , great video had problems before but not now sprays beautifully this paint 👍
For one shot primer dont need to apply it layer by layer right?
Professionally done and very well demonstrated. Muchas gracias Miguel Jiminez!
Perdon, ya lo encontré.
Cuando en castellano ??
Soft laiers 😁🤔
One shot is by far the best primer i have ever used. The cap sucks though.
Hello. I have a question. What is the dilution of Ammo colors and compressor pressure to paint à German WWII camouflage. AS I do now (straight out the jar and 1Kg pressure I have "Spiders". Thank you for the answer.
I need to buy these!
Can I spray Mig acrylics over Tamiya's grey rattle can primers?
seems like a ton of issues when vallejo, tamiya, and mr color have no issues. why bother with this stuff
Sorry Mig but your paint is crap.
Good video and I like how the Transparator gives a good definition of a metal surface. Very helpful.
I should have known this 3 years ago, had nothing but trouble with spraying this paint. Went over to Vallejo. If I had known this them I might have still been using it !
When you did make a video how to properly use paints ( airbrushing big large surface ) you should also make a video how to spray thin and fine lines.
Кто нибудь подскажите пожалуйста,я не понял на счёт давления в компрессоре, так каково оно???? Хименез совсем не чётко сказал цифру..
No me queda claro la diferencia de usar el transparator o el thinner.
I stopped buying ammo mig's paint s. They are too susceptible to abrasion.
Be aware of the acrylic thinner!! If mixed with the Mig Ammo acrylics it creates a mixture wich solidifies immediately inside of your airbrush while you re spraying creating a dense jelly. In my case i used the thinner with acrylic matt clear and this fucking jelly obstructed the inside of my airbrush, it arrived even inside the air valve wich has a little button in it that the airbrush trigger press when opening air flow. Now this little button doesn t move freely and sometimes it blocks making the airflow no more smooth as it should be. I have no idea how to disassemble this part neither if this part can be cleaned iinside. THIS FUCKING SHIT RUINED MY BRAND NEW IWATA NEO!!!!!
Hello Mig! I’d like to request that you do a video on how to use your different Lucky varnish that you sell. I’ve tried finding info myself and following instructions with “thin coats” but the glossy does not get very glossy when I do this… please help /: trying both with 0.2 and 0.35 needle and no big difference. Becomes glossy if I flood but then I risk getting craters or pooling…
hello how with what i have to clean my airbrush after using your colors?
Always had good experience with Ammo paints. Airbrushing and hand brushing.
The painting result is not perfect in my opinion. The layer is not as smooth as it used to be with Vallejo or Tamiya paints. It will be even more visible after coating glass varnish. I do not recommend MIG AMMO paints.